BabyG Vinyl Decal
These Decals are cut on Permanent Vinyl and then hand weeded to reveal the beauty, If you are ordering a custom decal PLEASE MAKE SURE ALL SPELLING IS CORRECT!
All decals come with a squeegee and instructions!
Application of your decal, there are a couple of general rules to follow:
For best results, Installation should be in temperatures above 50°F(10°C) and below 90°F(32°C)
You should always clean the application surface before applying the decal—remove all dirt, dust, grease, etc.
When applying, begin in one corner/side and work your way out from there. Don’t place the decal all at once as this can lead to large air bubbles
Use a squeegee to get rid of small/minor air bubbles—it is normal to have small air bubbles following installation, most of them will work their way out after 24 hours.
Place the (removed) backing as a liner between the squeegee and the decal to prevent scratch marks from the squeegee.
You can use a dry erase marker (on applicable surfaces) or masking tape to ensure better positioning and more accuracy when applying your decal. And there you have it Like a Pro your Decal is On! And will last you a while! Thank you and Enjoy!
These Decals are cut on Permanent Vinyl and then hand weeded to reveal the beauty, If you are ordering a custom decal PLEASE MAKE SURE ALL SPELLING IS CORRECT!
All decals come with a squeegee and instructions!
Application of your decal, there are a couple of general rules to follow:
For best results, Installation should be in temperatures above 50°F(10°C) and below 90°F(32°C)
You should always clean the application surface before applying the decal—remove all dirt, dust, grease, etc.
When applying, begin in one corner/side and work your way out from there. Don’t place the decal all at once as this can lead to large air bubbles
Use a squeegee to get rid of small/minor air bubbles—it is normal to have small air bubbles following installation, most of them will work their way out after 24 hours.
Place the (removed) backing as a liner between the squeegee and the decal to prevent scratch marks from the squeegee.
You can use a dry erase marker (on applicable surfaces) or masking tape to ensure better positioning and more accuracy when applying your decal. And there you have it Like a Pro your Decal is On! And will last you a while! Thank you and Enjoy!
These Decals are cut on Permanent Vinyl and then hand weeded to reveal the beauty, If you are ordering a custom decal PLEASE MAKE SURE ALL SPELLING IS CORRECT!
All decals come with a squeegee and instructions!
Application of your decal, there are a couple of general rules to follow:
For best results, Installation should be in temperatures above 50°F(10°C) and below 90°F(32°C)
You should always clean the application surface before applying the decal—remove all dirt, dust, grease, etc.
When applying, begin in one corner/side and work your way out from there. Don’t place the decal all at once as this can lead to large air bubbles
Use a squeegee to get rid of small/minor air bubbles—it is normal to have small air bubbles following installation, most of them will work their way out after 24 hours.
Place the (removed) backing as a liner between the squeegee and the decal to prevent scratch marks from the squeegee.
You can use a dry erase marker (on applicable surfaces) or masking tape to ensure better positioning and more accuracy when applying your decal. And there you have it Like a Pro your Decal is On! And will last you a while! Thank you and Enjoy!